Description
Berger VLD
The Berger VLD Target Rifle Bullet is one of the flattest shooting Rifle Bullets on the market today. Emulated by all others, the VLD Target Rifle Bullet incoporates a secant ogive design which allows the Rifle Bullet to experience less drag as it travels to the target. This reduced drag is why the VLD shoots flatter, experiences less wind-drift, and has a higher retained velocity than all others.
Hornady ELD-X
The Hornady ELD-X features a streamlined secant ogive with optimum boattail design, plus the highly concentric AMP bullet jackets, combined with the patent pending Heat Shield tip creates a supremely accurate, high BC match bullet. With high velocity, 0-400 yard impact, the bullet continually expands throughout its penetration path. The thick shank of the jacket and high Interlock ring keep the core and jacket together providing 50-60% weight retention. Upon low velocity, 400+ yard impacts, the Heat Shield tip drives backward into the bullet to initiate expansion. Exhibiting conventional expansion with a large mushroom and 85-90% retained weight the bullet provides deep penetration and large wound cavities.
Hornady ELD-VT
Bring trophies home and send varmints packing with the new ELD-VT™ bullet from Hornady. Incorporating years of ballistic research, ELD-VT™ pairs the aerodynamics of a low-drag match bullet with the light weight and high velocity of a varmint bullet. With its unmatched accuracy and explosive fragmentation, ELD-VT™ picks up trophies as fast as it drops varmints!
Hornady ELD-M
Conventional polymer tips in high BC bullets melt in flight. Hornady engineers discovered that conventional bullet tip materials in streamlined, high BC bullets melt and deform. Although not a significant issue affecting moderate BC conventional tipped varmint and hunting bullets, aerodynamic heating causes BC reduction and degradation of accuracy, particularly at extended ranges (400 yds +). To counter this effect, Hornady identified a heat resistant polymer and developed the patent pending Heat Shield tip. This revolutionary new tip creates the perfect meplat (tip) with exceptionally consistent results from bullet-to-bullet and lot-to-lot.
Hammer HST
This pure copper Hammer HHT™ will have fantastic terminal performance on varmints to big game. This bullet is a fantastic option for the hunters that have fast twist barrels that can take advantage of the bc of the heavier 22 caliber bullet.
Cutting Edge ER Raptor
The ER (Extended Range) Raptor™ is a tipped hollow point design and is intended for long-range hunting out to 600yds. Instead of mushrooming, our Raptor bullets are all designed to shed 6 blades after 1-2″ of penetration while the base continues for even deeper penetration.
RMR BTHP 3GH (Munitionco RMR ETI)
This is a brand new product by RMR. Initial testing tells me this bullet has a better BC than the Hornady, featuring a heavier Copper Jacket with near 0 manufacturing tolerances this bullet will out perform and shoot more consistently than the competition giving you the confidence to go to the field with the most lethal and accurate ammo available for a .22 Caliber. Built with EXTREME precision for better TRAJECTORY and IMPACT.
130 Grain Swift Scorocco
Caliber: .26 Cal, Weight: 130 Grain, G1 BC: .571 Minimum Twist Rate:1:9”
Loaded Ammunition Specs- COL: 3.300, Case Head to Ogive:***, Velocity: 3400 fps.
130 Grain Berger VLD
Caliber: .26 Cal, Weight: 130 Grain, G1 BC: .571 Minimum Twist Rate:1:9”
Loaded Ammunition Specs- COL: 3.300, Case Head to Ogive:***, Velocity: 3400 fps.
143 Grain Hornady ELD-X
Caliber: .26 Cal, Weight: 143 Grain, G1 BC: .625 Minimum Twist Rate:1:8”
Loaded Ammunition Specs- COL: 3.300, Case Head to Ogive:***, Velocity: 3250 fps.
147 Grain Hornady ELD-M
Caliber: .26 Cal, Weight: 147 Grain, G1 BC: .697 Minimum Twist Rate:1:8.5”
Loaded Ammunition Specs- COL: 3.300, Case Head to Ogive:***, Velocity: 3200 fps.
156 Grain Berger EOL
Caliber: .26 Cal, Weight: 156 Grain, G1 BC: .679 Minimum Twist Rate:1:8”
Loaded Ammunition Specs- COL: 3.300, Case Head to Ogive:***, Velocity: 3100 fps.
Upgrade Options
Custom Services
Mini Ladder Test upgrade - $119
When selecting this upgrade with an order of 20 MunitionCo Ammo loads we will send you a box of ammo containing a ladder test of 6 rounds of 3 loaded in different recipes, plus 2 to check your rifles zero to shoot in your rifle, along with an info sheet to document which three shoot the best group. Once you have shot the ladder tests in your rifle you will send us a copy of the info sheet back to our email and we will load and ship you a 20 round box of ammo in the recipe that shot the best out of your rifle. The upgrade covers the extra ammo and shipping cost.
Reloading Your Fired Brass upgrade - $24 per 20
Upon firing a shot, the brass expands to the rifles chamber size. A rifle shooting its own once fired brass will shoot more accurately than new brass due to the fit of the brass in the chamber. MunitionCo can clean, prep and reload your once fired brass into ammo that will fit your rifle like a glove and increase its accuracy. Please select the “Reload my brass” upgrade when ordering ammo and we will begin the process of having you ship us your fired brass.
*Note- Do not send in brass fired from multiple guns. This service is for brass fired from the same rifle in which you will be shooting the loaded ammo out of again. You will have to send in the same number of brass that you order in loaded ammo.
Rifle Sighting In & Building a Dope Card to 800 Yards Upgrade- $299
If you select this upgrade when ordering 20 rounds of ammo, MunitionCo will sight your rifle in with the ammo you have chosen, build a dope card for you to keep, and test the point of impact at our range out to 800 yards. You will need to ship us your rifle ready to shoot in a hard case to our FFL address. We will reach out to you upon receiving the order with the upgrade selected to give you the shipping instructions. You will receive 20 finished rounds of the MunitionCo ammo you selected and your rifle sighted in ready to shoot out to 800 Yards with this service.
*Note If you desire a custom engraved turret or laser etched weather proof turret tape to go on your optic that is built for this load, please let us know in the comment section of your order, and we will get your optic information to send you the pricing options. There will be an additional fee for the custom engraved turret in the range of $75-$300 based on qualifying optic or turret tape fee of $75.
There are no reviews yet.