Description
Nosler Ballistic Tip
Delivering the accuracy, consistency and down range punch required for clean kills in all situations, Nosler’s Ballistic Tip® hunting bullet maximizes energy transfer for devastating performance. The aerodynamic polymer tip (color coded by caliber) initiates rapid and uniform expansion of the bullet upon impact while the fully-tapered jacket provides maximum energy transfer and optimum weight retention at all practical velocities. Equipped with a heavily jacketed base that acts as a platform for large-diameter mushrooms and a boat-tail design that enhances long-range accuracy, the Ballistic Tip® is a favorable design for reloaders targeting deer-sized game.
Nosler Partition
Nosler Partition Bullets feature a fully tapered jacket that ruptures instantly at the thin jacket mouth, yet the gradual thickening along the bullet’s axis controls expansion and curls the jacket uniformly outward at high or low velocities. Nosler’s integral Partition supports the expanded mushroom and retains the rear lead alloy core. The enclosed rear core retains more than half the original bullet weight for deep penetration. The special crimp locks in the rear core section, adding strength to resist deformation under the pressure of heavy magnums.
Swift Scirocco 2
Scirocco bonded is the perfect bullet design for today’s fast, flat-shooting long range cartridges. Its secant ogive, 15 degree boat tail base and polymer tip create a sleek, aerodynamic profile that helps maintain down-range velocities and flat trajectories. The extra heavy tapering jacket wall with an internally bonded lead core provides structural integrity, reliable expansion and penetration with over 70% weight retention.
Nosler Accubond
Through an exclusive bonding process that eliminates voids in the bullet core, AccuBond® couples Nosler’s proven copper-alloy jacket with its special lead-alloy core. The result is a bullet that flies true, penetrates deep and retains its weight, without causing extensive barrel fouling. The unique white polymer tip resists deforming and initiates expansion on impact. Nosler’s Solid Base® at the rear of the bullet acts as a platform for large diameter mushrooms.
Nosler Accubond LR
Bullets specifically developed for the increasing popularity of long range hunting. Nosler’s unique manufacturing techniques allow them to produce a rapidly expanding bonded hunting bullet with the highest Ballistic Coefficient possible in a bullet of the same caliber and weight. The bonding process eliminates the issue of being too close, a problem often associated with many of the other high hunting bullets. AccuBond Long Range Bullets’ long, sleek ogive was designed to produce outstanding accuracy in a wide variety of firearms without the necessity to be loaded close to or in contact with the lands
Barnes Tipped TSX
The bullet that delivers a triple impact- one when it first strikes game, another as the bullet begins opening, and a third devastating impact when specifically engineered cavity fully expands to deliver extra shock and maximum transferred energy. Includes a Polymer tip for increased ballistic coefficient. The TSX is the same bullet without the Polymer tip. Hollow Point.
Barnes LRX
The Barnes Long-Range X Bullet (LRX) line is designed after the best-selling Tipped Triple-Shock X Bullet. The LRX bullet design increases Ballistic Coefficient values by increasing ogive and boat tail lengths to improve the bullets’ long-range ballistic performance. For the hunter who is confident in long-range hunting, the LRX will fill the niche of this new hunting craze. LRX bullets will continue to be manufactured with the proven 100-percent copper, lead-free bodies. The bullet’s polymer tip initiates expansion, causing the nose cavity to open instantly on contact doubling the bullet’s original diameter while creating four cutting petals that wreak extensive internal damage.
Berger VLD
The Berger VLD Target Rifle Bullet is one of the flattest shooting Rifle Bullets on the market today. Emulated by all others, the VLD Target Rifle Bullet incoporates a secant ogive design which allows the Rifle Bullet to experience less drag as it travels to the target. This reduced drag is why the VLD shoots flatter, experiences less wind-drift, and has a higher retained velocity than all others.
Berger Elite Hunter
Berger Elite Hunter Bullets utilize their industry-leading hybrid ogive, which blends tangent and secant designs to optimize efficiency, reduce wind-drift, and minimize sensitivity to seating depth. Elite Hunter Bullets are identical in construction, shape and performance to the Berger Hybrid Target series, except they utilize a thinner J4 Precision Jacket for rapid expansion on game animals. Elite Hunters are designed to penetrate 2-3″ and then begin to expand and create a massive wound cavity up to 15″. The hydrostatic shock causes most animals to drop immediately.
Hornady ELD-X
The Hornady ELD-X features a streamlined secant ogive with optimum boattail design, plus the highly concentric AMP bullet jackets, combined with the patent pending Heat Shield tip creates a supremely accurate, high BC match bullet. With high velocity, 0-400 yard impact, the bullet continually expands throughout its penetration path. The thick shank of the jacket and high Interlock ring keep the core and jacket together providing 50-60% weight retention. Upon low velocity, 400+ yard impacts, the Heat Shield tip drives backward into the bullet to initiate expansion. Exhibiting conventional expansion with a large mushroom and 85-90% retained weight the bullet provides deep penetration and large wound cavities.
125 Grain Nosler Ballistic Tip
Caliber: .30 Cal, Weight: 125 Grain, G1 BC: .366, Minimum Twist Rate:1:12”
Loaded Ammunition Specs- COL: 2.810, Case Head to Ogive:***, Velocity: 3100 fps.
130 Grain Barnes Tipped TSX
Caliber: .30 Cal, Weight: 130 Grain, G1 BC: .350, Minimum Twist Rate:1:12”
Loaded Ammunition Specs- COL: 2.800, Case Head to Ogive:***, Velocity: 3050 fps.
150 Grain Nosler Ballistic Tip
Caliber: .30 Cal, Weight: 150 Grain, G1 BC: .435, Minimum Twist Rate:1:12”
Loaded Ammunition Specs- COL: 2.810, Case Head to Ogive:***, Velocity: 2850 fps.
150 Grain Nosler Partition
Caliber: .30 Cal, Weight: 150 Grain, G1 BC: .387 Minimum Twist Rate:1:12”
Loaded Ammunition Specs- COL: 2.810, Case Head to Ogive:***, Velocity: 2850 fps.
150 Grain Swift Scorocco
Caliber: .28 Cal, Weight: 150 Grain, G1 BC: .515 Minimum Twist Rate:1:9” Loaded Ammunition Specs- COL: 2.810, Case Head to Ogive:***, Velocity: 2850 fps.
165 Barnes TSX
Caliber: .30 Cal, Weight: 165 Grain, G1 BC: .398, Minimum Twist Rate:1:12”
Loaded Ammunition Specs- COL: 2.800, Case Head to Ogive:***, Velocity: 2750 fps.
165 Swift Scirocco 2
Caliber: .30 Cal, Weight: 165 Grain, G1 BC: .470, Minimum Twist Rate:1:12”
Loaded Ammunition Specs- COL: 2.800, Case Head to Ogive:***, Velocity: 2750 fps.
168 Grain Nosler Accubond LR
Caliber: .30 Cal, Weight: 168 Grain, G1 BC: .525 Minimum Twist Rate:1:12”
Loaded Ammunition Specs- COL: 2.810, Case Head to Ogive:***, Velocity: 2650 fps.
168 Grain Berger VLD
Caliber: .30 Cal, Weight: 168 Grain, G1 BC: .498, Minimum Twist Rate:1:13”
Loaded Ammunition Specs- COL: 2.810, Case Head to Ogive:***, Velocity: 2650 fps.
175 Barnes LRX
Caliber: .30 Cal, Weight: 175 Grain, G1 BC: .508 Minimum Twist Rate:1:11”
Loaded Ammunition Specs- COL: 2.810, Case Head to Ogive:***, Velocity: 2570 fps.
178 Grain Hornady ELD-X
Caliber: .30 Cal, Weight: 178 Grain, G1 BC: .552 Minimum Twist Rate:1:12”
Loaded Ammunition Specs- COL: 2.810, Case Head to Ogive:***, Velocity: 2550 fps.
180 Grain Berger Elite Hunter
Caliber: .30 Cal, Weight: 180 Grain, G1 BC: .576, Minimum Twist Rate:1:11”
Loaded Ammunition Specs- COL: 2.810, Case Head to Ogive:***, Velocity: 2500 fps.
180 Grain Nosler Partition
Caliber: .30 Cal, Weight: 180 Grain, G1 BC: .474, Minimum Twist Rate:1:12”
Loaded Ammunition Specs- COL: 2.810, Case Head to Ogive:***, Velocity: 2500 fps.
180 Grain Swift Scirocco 2
Caliber: .30 Cal, Weight: 180 Grain, G1 BC: .520, Minimum Twist Rate:1:12”
Loaded Ammunition Specs- COL: 2.810, Case Head to Ogive:***, Velocity: 2500 fps.
Upgrade Options
Custom Services
Mini Ladder Test upgrade - $119
When selecting this upgrade with an order of 20 MunitionCo Ammo loads we will send you a box of ammo containing a ladder test of 6 rounds of 3 loaded in different recipes, plus 2 to check your rifles zero to shoot in your rifle, along with an info sheet to document which three shoot the best group. Once you have shot the ladder tests in your rifle you will send us a copy of the info sheet back to our email and we will load and ship you a 20 round box of ammo in the recipe that shot the best out of your rifle. The upgrade covers the extra ammo and shipping cost.
Reloading Your Fired Brass upgrade - $24 per 20
Upon firing a shot, the brass expands to the rifles chamber size. A rifle shooting its own once fired brass will shoot more accurately than new brass due to the fit of the brass in the chamber. MunitionCo can clean, prep and reload your once fired brass into ammo that will fit your rifle like a glove and increase its accuracy. Please select the “Reload my brass” upgrade when ordering ammo and we will begin the process of having you ship us your fired brass.
*Note- Do not send in brass fired from multiple guns. This service is for brass fired from the same rifle in which you will be shooting the loaded ammo out of again. You will have to send in the same number of brass that you order in loaded ammo.
Rifle Sighting In & Building a Dope Card to 800 Yards Upgrade- $299
If you select this upgrade when ordering 20 rounds of ammo, MunitionCo will sight your rifle in with the ammo you have chosen, build a dope card for you to keep, and test the point of impact at our range out to 800 yards. You will need to ship us your rifle ready to shoot in a hard case to our FFL address. We will reach out to you upon receiving the order with the upgrade selected to give you the shipping instructions. You will receive 20 finished rounds of the MunitionCo ammo you selected and your rifle sighted in ready to shoot out to 800 Yards with this service.
*Note If you desire a custom engraved turret or laser etched weather proof turret tape to go on your optic that is built for this load, please let us know in the comment section of your order, and we will get your optic information to send you the pricing options. There will be an additional fee for the custom engraved turret in the range of $75-$300 based on qualifying optic or turret tape fee of $75.
There are no reviews yet.